Changes

24.05.2018 The [Required Software] section has been updated(/docs/orbicraft/instruction_for_working_with_orbicraft/required_software). Firmware version of the GUI of the on-board computer Web interface A local copy of the Wiki for the web interface of the designer

05.04.2018 Added a section about WorldSkills.

08.03.2018 The design of the wiki interface has been changed. Now the main section navigation bar is located on the left, and the selected section is displayed in the center of the screen.

Code examples in C and Python will be located in the sections of the corresponding subsystems in the future. At the moment, most of the relevant code examples have already been moved to the appropriate sections.

12.02.2018 Corrections related to the correct determination of the magnetometer axes have been added. The current version of the GUI firmware and a local copy of the Wiki for the web interface of the designer have also been updated.

25.09.2017 A new version of the flywheel with a high-power engine driver based on new circuitry has been developed and produced. The new flywheels are compatible with the old ones and come with all new supplies

11.08.2017 Added error output in the web interface when writing Python programs. It is now much easier to look for errors in the code and fix them.

31.07.2017 Added support for Russian-language comments in Python.

03.05.2017 The BOT board has been completely redesigned for new supplies in order to increase reliability and facilitate production.

24.03.2017 A wiki mirror with descriptions has been added to the designcore web interface

19.03.2017 shield has been developed for arduino, which allows you to integrate Arduino into the on-board network of the designer

23.09.2016 Added the ability to clear the CPU source code base, added backlight and changed the GUI of the web interface

21.06.2016 Added manipulator and motor control functions (developed by children within Sirius) to the library of functions.

21.04.2016 A circuit for limiting the current consumption has been added, and the SEP fuses have been switched to 3.15A

12.04.2016 A loop tester has been added to check the correct compression, which is necessary according to the results of the work.

11.04.2016 Added test support for Python syntax

20.02.2016 A 12V 3A power adapter has been found and changed in the supplies, capable of withstanding operation when charging (current limiting circuit instead of a circuit breaker).

11.02.2016 Added accelerometer support in the magnetometer module for IPM im. Keldysh and aerostola

09.02.2016 A fan motor module has been developed for IPM im. Keldysh

22.12.2015 A two-sensor version of the solar sensor with a plastic mask has been developed.

25.11.2015 A 5A fuse protection circuit has been added and a remote unit for easy installation