Skip to main content

Required Software

Ground VHF driver​

Download and install the [vhf_usb_driver] driver(/files/orbicraft3d/vhf_usb_driver.zip ).

Ground HF driver​

Download and install the [cp210x_windows_drivers] driver(/files/orbicraft3d/cp210x_windows_drivers.zip ).

Houston Application​

Download and unzip the software Houston Control Center. Copy the identification code in the window that appears "License verification" and send it to the mail technical.support@sputnix.ru with the following information:

  1. Name of the organization;
  2. The agreement under which the license/equipment with the license was purchased;
  3. The article of the equipment;
  4. Serial number;
  5. Identification code;
  6. User Name;
  7. Position in the organization.

After that, SPUTNIX will send the appropriate license file. Copy the received license file to the folder SX-Houston-app\license and SX-Houston-server\license

IR Reciever​

If the ground RF module board has the decimal number SPTX-PCB.82, then use irreceiver_v1.1. If the ground RF module board has the decimal number SPTX-PCB.206, then use irreceiver_v1.2

Notepad++ development environment with built-in libraries for OrbiCraft 3D​

Notepad_r117++ (Beta version from 05/21/2019)

Mission Control Center MCC​

BY MCC (Version X)

Library for Arduino​

To interact with the OrbiCraft constructor and Arduino, you need to install the following library in the [Arduino IDE] environment (https://www.arduino.cc/en/Main/Software "Arduino IDE"). Library for interaction between Arduino and OrbiCraft constructor

Installing the mirror of this wiki on the on-board computer​

For older versions of the constructor (before 07.2017), first install the web server packages(Light-server and Web-socket), Schsat-Wiki. A local copy of the Wiki for the web interface of the designer is available at http://192.168.42.1:8000 (dated 05/23/2018)

Drivers​

USB-RS485 Cable Driver